about a year ago I was out in the country installing a wetback from a existing hwc to a newly installed wood fire, as I was installing a wetback the local council made sure a tempering valve was installed to the low pressure hot water cylinder, however I wasnt thinking and installed a nefa temp valve to the outlet of the hwc, and yet again i forgot about the bloody vent  

anyway I got a call the next day that there was a burst pipe under the floor, straight away I knew what I had done - so when i turned up i found the pressure pipe line feeding the cylinder (which changed to copper about 3m from the inlet of the cylinder) was all clipped up under the floor but it was in waves like it had got hot and sagged where there was no supports, the pressure pipe connection from the 20mm rx connection coming from the tank (on a stand) had blown off and so i re connected a new fitting, replaced the pressure pipe, and repositioned the temp valve below the floor where it was not obstructing the vent/outlet line if the hwc.

i dont know why the pipe burst, the water line from the outlet of the tank on the stand had no non-return valve or closed valve, maybe the weakest join just blew off, lucky i didnt kill any one, i felt soo bad that i payed for all the new fittings and I didnt charge the customer a cent, he was a good guy, really understanding, PHEW!!!

Linkback: https://www.plumbers.nz/dodgy-plumbing-or-great-plumbing/4/almost-blew-up-a-cylinder/1093/

hi guys/Roberto, have you thought of a different career path? cheers

ive installed heaps, just wasnt thinking that day, no im not thinking of a another career path thanks

This is really good, i'm wondering whether I should create a plumbing confessions corner now lol 

well i was at a job one day and there was this basket full of dirty laundry.......................

lol