Plumbers NZ is New Zealand's largest online plumbing, gas and drainage resource. Plumbing exam help, plumbing news, directory and free quotes.

Author Topic: Move to NZ  (Read 5108 times)

0 Members and 1 Guest are viewing this topic.

Offline iamthetoad

  • Jr. Member
  • **
  • Posts: 6
  • Karma: +0/-0
Move to NZ
« on: February 22, 2010, 08:55:22 PM »
hi
my wife and i have decided to make the move to NZ. i am a gas safe reg (corgi) gas engineer, with 8 years experience, hoping for any info poss on the best way to get into the gas trade over there. will my UK quals be enough to get me a limited licence? i dont have LPG, is it worth me doing it before i come over?

Linkback: https://www.plumbers.nz/plumbing-international/15/move-to-nz/377/

Offline foggy

  • Jr. Member
  • **
  • Posts: 63
  • Karma: +6/-0
Re: Move to NZ
« Reply #1 on: February 23, 2010, 09:56:11 PM »
Hello mate,
If you contact the PGDB and speak to them they should explain what you have to do.
Reckon you'll have to send over your qualifications for them to access to see whether they'll allow you to sit the exams.
Apparently you have to go to Wellington now to do your practical exam (expensive) then sit your theory paper (june or november)
Think you should be able to get a limited licence but that looks like it's going to change so not sure.
If you do come here you will be expected to work on quite a bit of LPG so might be a good idea to get some extra knowledge.
Main thing is you've got to expect to go back to studying and relearning as there are quite a few exams and there made to be pretty difficult, best to look on the PGDB site for past exams and work of them.
Best of luck and be prepared for a serious drop in wages!  ( still wouldn't go back to the u.k though).
Ade.

Offline leaky51

  • Jr. Member
  • **
  • Posts: 4
  • Karma: +0/-0
Re: Move to NZ
« Reply #2 on: February 24, 2010, 06:29:37 AM »
toady

You lucky devil.  Good luck to you and your family!

Offline iamthetoad

  • Jr. Member
  • **
  • Posts: 6
  • Karma: +0/-0
Re: Move to NZ
« Reply #3 on: February 24, 2010, 08:32:59 PM »
hi Ade.
have the pgda have a training book or regs book like corgi (gas safe now)?
are the exams any harder than UK??
where about do u work?
      Cheers!

Offline foggy

  • Jr. Member
  • **
  • Posts: 63
  • Karma: +6/-0
Re: Move to NZ
« Reply #4 on: February 24, 2010, 10:40:10 PM »
There's the New Zealand gas standards book which you would need approx $120.00, the exam for registration isn't too bad but you would have to re-learn alot of the technical calculations as it's done different here and you have to answer everything the kiwi way as it'll be marked wrong even if you know what your talking about.
All the exams are closed book so there is alot of information you have to try and absorb even though in reality you would reference certain things out in the field.
If you get registered you have to wait 2 years till you can sit your craftsman exams, one gas paper and one business paper and this is where it can get really difficult but you have to have these to be able to sign work off.
Best way is downloading the old papers and if you can get some answers thats a big help as if you don't use the correct words they will mark you wrong even though it can be obvious you've answered correctly. (been there)
I live and work in Tauranga, beautifull place but the wages are pretty awfull.
Best of luck

Offline iamthetoad

  • Jr. Member
  • **
  • Posts: 6
  • Karma: +0/-0
Re: Move to NZ
« Reply #5 on: February 25, 2010, 07:39:42 AM »
cheers mate.
we're looking at Auckland, it's furthest north where me wife can get a job.
How bad is the pay? Dose it get better when you've worked a few years?
How long you bin there?

Offline foggy

  • Jr. Member
  • **
  • Posts: 63
  • Karma: +6/-0
Re: Move to NZ
« Reply #6 on: February 25, 2010, 09:22:43 PM »
Auckland is the place to go if you want a better wage, heard various tales of what people are earning there, lot more than here but you never know till your there yourself.
Been here just over 3 years, started on $20 which i didn't think was that bad to start, now let's just say i still earn less than $25 hr and i'm a gasfitter, plumber, heating installer (rads and underfloor) solar and install pellet fires and boilers.
I'd still advise you to come here as apart from the money i can't really fault the place, and anyway anythings better than the u.k.
Cheers.

Offline iamthetoad

  • Jr. Member
  • **
  • Posts: 6
  • Karma: +0/-0
Re: Move to NZ
« Reply #7 on: February 26, 2010, 11:32:46 PM »
hi
You're not wrong there mate it's got alot worse in the last three years aswell with that tool running the country, and i dont think it'll get better for a long time!!!!!!!!!!!!!!

Offline robbo

  • Hero Member
  • *****
  • Posts: 1259
  • Karma: +83/-7
Re: Move to NZ
« Reply #8 on: February 27, 2010, 07:21:32 PM »
hi, as you can see being a gasfitter in this country has become a very expensive trade, what is it like in the u.k. i`ve been here too many years to know what goes on over there now.
When you do(if ever)become qualified,(reg or craft),you will need to attend ongoing training every year to be able to buy a licence, to be allowed to work. I have just recieved training info for 8 points(half of what you need)from contact energy. have a look at the time for training and the cost of 8 points then estimate how much the rest will cost in time and money,you will be supprised. This is not a RANT just info for anyone that is in gassfitting.I have given up the gas now because of the time/cost/stress that you need to stay in it,good luck to all who persevere, cheers.

Offline iamthetoad

  • Jr. Member
  • **
  • Posts: 6
  • Karma: +0/-0
Re: Move to NZ
« Reply #9 on: February 27, 2010, 09:00:39 PM »
hi,
we don't have to do training every year to be gas safe registered, but we do have to take a 4 day exam (acs) which requires 100% marks to pass, so we do have to stay up to date. with that and the gas safe regester (corgi) it costs us around £500 a year!
And our weathers still s**t!!!!!!

Offline iamthetoad

  • Jr. Member
  • **
  • Posts: 6
  • Karma: +0/-0
Re: Move to NZ
« Reply #10 on: February 27, 2010, 09:04:51 PM »
hi,
we don't have to do training every year to be gas safe registered, but we do have to take a 4 day exam (acs) every 5 years which requires 100% marks to pass, so we do have to stay up to date. with that and the gas safe regester (corgi) it costs us around £500 a year!
And our weathers still s**t!!!!!!

Offline jd24hrs

  • Full Member
  • ***
  • Posts: 128
  • Karma: +3/-0
Re: Move to NZ
« Reply #11 on: July 13, 2010, 02:27:12 AM »
i would advise anybody thinking of moving to nz to do plumbing or gas to seriously think again as you will be poorly paid and mistreatedby some of the under quilified craftsman (ha ha)plumbers/fitters


Share via digg Share via facebook Share via linkedin Share via twitter

Similar Topics

  Subject / Started by Replies / Views Last post
xx
Is it time to move on??

Started by integrated

18 Replies
8605 Views
Last post August 23, 2011, 10:56:17 PM
by Badger
 
Share this topic...
In a forum
(BBCode)
In a site/blog
(HTML)